user manual

68 AT-TQ2403 - Management Software - User's Guide
Example of Using Static WEP
For a simple example, suppose you configure three WEP keys on the access point. In our example, the
Transfer Key Index for the AP is set to "3". This means that the WEP key in slot "3" is the key the access
point will use to encrypt the data it sends.
Figure 25: Security Setting Page – Static WEP Setting Example
You mus
t then set all client stations to use WEP and provide each client with one of the slot/key
combinations you defined on the AP.
For this example, we’ll set WEP key 1 on a Windows client as below figure.
Figure 26: Providing a Wireless Client with a WEP Key