user manual

78 AT-TQ2403 - Management Software - User's Guide
Chapter 10: Maintenance and Monitoring
The maintenance and monitoring tasks described here all pertain to viewing and modifying settings on
specific access points; not on a cluster configuration that is automatically shared by multiple access
points. Therefore, it is important to ensure that you are accessing the Administration Web pages for the
particular access point you want to configure. For information on this, see “Navigating to Configuration
Information for a Specific AP and Managing Standalone APs”. The following maintenance and monitoring
topics are covered.
 Interfaces
 Ethernet (Wired) Settings
 Wireless Settings
 Event Logs
 Enabling or Disabling Persistence
 Log Relay Host for Kernel Messages
 Transmit/Receive Statistics
 Associated Wireless Clients
 Neighboring Access Points
Interfaces
To monitor wired LAN and wireless LAN (WLAN) settings, navigate to Status > Interfaces on the
access point you want to monitor.
Figure 31: Status - Interfaces Page