user manual

1.5. Overview of the Optional SFP Modules
With the GSS-8T2SFPV2 switch, the SFP ports are paired with RJ-45 copper ports 7 and 8.
Only one of any given paired port can be used. In this manner, these paired ports can be
seen as ‘Dual Media’ ports that support 10/100/1000Mbps or 1000Mbps fibre via the SFP
interfaces.
Optional 1000Mbps mini-GBIC fibre transceiver modules can be used for high-speed uplink
connections to fibre backbones or servers, when installed in the SFP ports. A range of
optional Alloy mini-GBIC modules are available:
Alloy Part No. Description
MGBIC-MLC
1000Mbps multimode 1000Base-SX, 850nm, max. range 500m
MGBIC-SLC10
1000Mbps singlemode 1000Base-LX, 1310nm, max. range 10Km
MGBIC-SLC4013
1000Mbps singlemode 1000Base-LHX, 1310nm, max. range
40Km
MGBIC-SLC4015
1000Mbps singlemode 1000Base-LHX, 1550nm, max. range
40Km
MGBIC-SLC70
1000Mbps singlemode 1000Base-ZX, 1550nm, max. range 70Km
MGBIC-SLC100
1000Mbps singlemode 1000Base-EZX, 1550nm, max. range
100Km
MGBIC-WDMS3.20
1000Mbps WDM singlemode/singlecore 1310nm, max. range
20Km
MGBIC-WDMS3.20
1000Mbps WDM singlemode/singlecore 1550nm, max. range
20Km
Notes: * The two WDM (Wave Division Multiplexer) mini-GBIC modules are
designed to facilitate a link over a single core of singlemode fibre cable.
The two units must be used in a paired manner, one at either end of the link.
* Mini-GBIC modules that are designed to the relevant standards should be
compatible with any make of switch with SFP ports. If you have concerns
regarding compatibility, please contact the supplier of your mini-GBIC
product.
* The information given in the table above is current at time of publication;
availability of individual Alloy mini-GBIC modules may vary over time.
7
Fig. 1.4: Front View of
1000Base-SX/LX LC,
SFP Fibre Transceiver
Fig. 1.5: Front View of
1000Base-LX WDM LC
SFP Fibre Transceiver