user manual

3.2.1. System Configuration
System configuration is one of the most important options in the management of the switch.
Without proper configuration, the switch cannot be accessed or managed. The switch
supports manual IP address settings. When the IP address is changed you must reboot the
switch to have the settings take effect. Changing the IP address will require you to change
you management IP in your web browser.
Fig. 3.5
The configuration settings are made in the appropriate areas in the central grey box:
• Function Name: System Configuration
• Function Set IP address, subnet mask, default gateway, system name,
Description: password and auto logout timer for the switch.
• Parameter MAC Address (read only - RO):
Description: * The Ethernet MAC address of the management agent in
this switch.
Firmware Version (RO):
* The firmware version of this switch.
Hardware Version (RO):
* The hardware version of this switch.
Serial Number (RO):
* The device serial number is assigned by the manufacturer.
IP Address (read/write - RW):
* Configure the IP settings, then click the <apply> button to
update. The default IP is: 192.168.1.1
15