user manual

.3.7a

• Function Name: Management Interface

• Function There two options available Enabled or Disabled. This allows you to

Description: change what VLAN ID the management interface is able to be

configured on. This is only available when using Tag-Based VLAN’s.

• Parameter State:

Description: *Disabled: Disable Management VLAN ID, management

interface is accessed only by ports with VLAN ID 1.

*Enabled: When Enabled you can change the management

interfaces VLAN ID to a separate VLAN ID for

security purposes. Therefore only ports with the

same VLAN ID will be able to manage the switch.

*VID: Configure the required VID for the management

interface.