user manual

3.2.5. PVID Configuration
Fi
g
. 3.9
• Function Name: PVID Configuration
• Function From within this menu users can assign a VID number for
Description: each port. The range of VID numbers is from 1 to 4094. You can also
choose ingress filtering rules to each port. There are two ingress
filtering rules which can be applied to the switch. Ingress Filtering
Rule 1 is “forward only packets with VID matching this port’s
configured VID”. Ingress Filtering Rule 2 is “drop untagged frame”
• Parameter Port 1-8:
Description: * Port number
PVID:
* The PVID range will be from 1-4094. Before you set a
PVID number, ensure that you have created a Tag-
based VLAN with a VID of the same number. For
example, if port 1 receives an untagged packet, the
switch will apply the PVID (assume VID 5) to tag this
packet, the packet then will be forwarded as a packet
tagged with VID 5.
Rule 1:
27
* Forward only packets with VID matching this port’s
configured VID. You can apply Rule 1 as a way for a
given port to filter unwanted traffic. In Rule 1, a given
port checks if the received packet is a member of the
VLAN which the received port has been assigned via its
PVID. For example, if port 1 receives a tagged packet
with VID=100 (VLAN name=VLAN100), and if Rule 1 is
enabled, the switch will check if port 1 is a member of