user manual

VLAN100. If it is, then the received packet is forwarded;

otherwise, the received packet is dropped.

Rule 2:

* Drop untagged frame. You can configure a given port to

accept all frames (Tagged and Untagged) or just receive

tagged only frames. If the former is the case, then

packets either tagged or untagged will be processed. If

the later is the case, only packets carrying a VLAN tag

will be processed, all other packets will be discarded.

Please note:

⇒ If Rule 1 is enabled and port 1, for example, receives

an untagged packet, the switch will apply the PVID of

port 1 to tag this packet, and the packet will then be

forwarded

Tag:

* This is an egress rule applied on data transmitted out of

the port. Select 'untag' or 'tag'. Tag means that the

outgoing packets will be tagged with the configured VID, select

the check box (;). Untag means that the outgoing

packets will carry no VLAN tag headers.

Untag State:

* If this is enabled and the Untag VID matches the VID of

the packet, then the tag would be removed. If enabled

without a match, no operation will occur. If disabled, no

operation will occur.

Untag VID:

* The valid range is 0~4094.

. 3.9a