user manual

3.2.7 Mirror Configuration

. 3.11

• Function Name: Mirror Setting

• Function Mirror Configuration is used to monitor the traffic on

Description: the network. For example, assume that Port A is a ‘sniffer’ port and

Port B is the Source Port; configuring a mirror setting allows the traffic

passed by Port B to be copied to Port A for monitoring purposes

• Parameter Sniffer Mode:

Description: * Used for the activation or de-activation of the Port Mirror

function. Default is disable

Sniffer Port:

* Used to set up the port that will perform the monitoring.

Port 1-8 can be used; the default is Port 1

Source Port:

* Used to set up the port that will be monitored. Select the

check box (;) under the port label. The valid port range

is ports 1-8.