user manual

3.2.10. Trap Event Configuration

. 3.14

• Function Name: Trap Event Configuration

• Function The Trap Event Configuration interface screen enables the Alloy

Description: 8 Port Gigabit Switch to send out trap information when pre-

defined events occur on the network. The switch offers 7 different trap

events and 2 configurable destination Trap Hosts. Trap messages are

enabled by selecting the tick (;) box beside each event description.

Most events support a counter function to help identify the number of

times that an event has occurred.

Trap Events supported are as follows:

• Parameter Boot:

Description: * Warm Boot

* Cold Boot

* Illegal login

Link:

* Link up

* Link down

Transmit/Receive Error:

* Rx error threshold

* Tx error threshold