User's Manual

Installation Procedures

Please familiarize the manual content before begin installation. Depending on your

hardware configuration, use the following recommended steps for installation.

1) Mount the AIS chartplotter unit to an appropriate location (either table mount or

panel mount referring to following sections)

2) Install VHF antenna

3) Install GPS antenna

4) Connect antenna cables to the transceiver

5) Connect to other devices via NMEA 0183 or NMEA 2000 interface if applicable

6) Connect to an appropriate power source (12V / 24V DC)

7) Power on the power source (which turns on the transceiver unit)

8) Program MMSI and vessel information into the device

9) Perform system functional test