Manualshelf

User's Manual

ManualsBrandsAlltek Marine Electronics ManualsElectronicsAIS Class B SOTDMA Transponder with Chartplotter
11121314151617181920
18
Flush Mounting
1) Make a rectangle hole at the location to be installed, using the panel mount cutting
template.
2) Remove the two (2) plastic screw covers which are fitted on the top and bottom
sides of the display front face.
3) Confirm whether the AIS unit and the rectangular hole meet or not. Correct the
rectangular hole if it is defective.
4) Put the AIS unit on the opening and fix with four (4) tapping screws.
5) Refit the plastic covers removed in step (2).