User's Manual

The entire contents of this instruction manual, including any future updates, revisions,

and modifications, shall remain the property of AMEC at all times. Unauthorized copies

or reproduction of this manual, either in part or whole, in any form of print and

electronic media, is prohibited. The contents herein can only be used for the intended

purpose of this manual.

DISCLAIMER

AMEC is devoted to maintaining the correctness of this product manual. As we continue

to improve our AIS products to satisfy all customers’ needs, information in this

document is subject to change without notice. AMEC does not make any

representations or warranties (implied or otherwise) regarding the accuracy and

completeness of this document and shall in no event be liable for any loss of profit or

any commercial damage, including but not limited to special, incidental, consequential,

or other damage.

WARNING!

WARNING: The device must be installed and configured in conformity with the

provided instructions in the manual by qualified installer in order to ensure the

device performance.

WARNING: It is the responsibility of the operator to handle the AIS device with

care. The device cannot replace human vigilance. Therefore it is important to keep

a diligent outlook at all times.

WARNING: Please bear in mind that not all vessels are equipped with AIS

transceivers and therefore may not be visible to this device. Likewise, certain

conditions, such as device malfunction, the environment, improper use, and

overcrowded port traffic, may exist whereby the vessel equipped with this AIS

device is not visible to other AIS transceivers.

WARNING: DO NOT DISASSEMBLE OR MODIFY THE EQUIPMENT. Improper

disassembly or modification could impair its performance and will invalidate the

guarantee.

FOR USERS IN THE UNITED STATES OF AMERICA ONLY

WARNING: It is a violation of the rules of the Federal Communications

Commission to input an MMSI that has not been properly assigned to the

end user, or to otherwise input any inaccurate data in this device.

★ The entry of static data into this device shall be performed by the vendor of

the device or by an appropriately qualified person in the business of installing

marine communications equipment on board vessels.

★ Instructions on how to accurately enter and confirm static data in the device

can be found in this user manual.

User’s Manual