User's Manual

42
Options→General→User Settings
Parameter Name
Description
Key/Touch Beep
From the scroll-down list, the key/touch beep volume
can be selected between Off/Normal/Quiet/Loud
Time Settings
Here the „Time Zone“, “Time Format” and “Date
Format” can be user defined per the scroll-down list
Options→General→Alarm Settings
Parameter Name
Description
Alarm Sound
The alarm sound can be switched on or off here
CPA/TCPA Settings
The AIS transceiver can be configured to identify
approaching vessels which fall within certain criteria.
The CPA (Closest Point of Approach) defines a
boundary around the own vessel upon which, if
breached, will trigger an alert.
TCPA (Time to Closest Point of Approach) can only be
set if CPA is set, and will trigger the alert if the TCPA
limit is breached.
Any AIS target which triggers CPA or TCPA alarms, will
be highlighted with red color on chart, plot view and
target list.
Options→General→Log
Parameter Name
Description
SD Card Slot 2
When an SD card is inserted into slot 2, it´s total and
remaining capacity will be displayed here
Record AIS Data
To switch On/Off AIS datalogging
AIS Log Path
The AIS Log Path is just to state that a folder named
“AIS_Log” will be generated automatically in the SD
card´s root directory after the SD card is inserted into
slot 2
Options→Vessel Data Settings
Parameter Name
Description
Ship Static Data
Use the software keyboard to complete the inputs of
ship name, MMSI (Maritime Mobile Service Identity
reported by own ship) and call sign.
WARNING: The MMSI number can only be entered
once. Be sure to enter the correct MMSI number, as it
cannot be corrected if entered incorrectly.