Technical data

8.21 IGNITION PCB (Alpha 240XP only) - Refer to Fig. 28

1. Gain access as described in section 8.1.

2. Remove the two fixing screws and disconnect the wiring.

3. Refer to Fig. 28, connect the wiring to the new PCB and re-assemble in reverse order.

Alpha 240XP and 240XE - Component Replacement

Fig. 28 - Alpha 240XP

Fig. 27 - Alpha 240XE

Ignition electrode leads

Relay PCB

Ignition PCB

Reset switch

Relay PCB

Ignition PCB

Ignition lead