Instruction Manual

Doc. #: 0260011-J0 Rev B
102
Index
A
AC Configuration
AC Input Groups 30
AC Output Groups 30
AC wiring
AC input breaker 12
AC output breaker 12
connections diagram 37
pre-configured from the factory 35
torque setting 43
Alarms
AC Mains Lost (232) 75
AC Secondary Source Lost (233) 75
inverter
custom 59
standard 59
inverter alarm codes 77
saturation level alarm 88
System Saturated (231) 75
Auto DC Priority 61
B
Batteries
low voltage battery disconnect 15
wiring 38
Battery temperature probes 16
configuring temperature compensation 16
connecting to 40-pin connector 16
C
Certification
about 100
AIM 1500 module 86
AMPS24 HP 85
rectifier (1.8kW) EMI 87
Configuration parameters 88
alarm settings 97
global settings 90
inverter parameters 91
saturation level alarm 88
saving inverter settings 88
synchronization tracking speed 89
walk-in mode 89
Controller
configuring temperature compensation 16
home screen 52
inputs & outputs 85
login & password 53
removing 69
resetting 53
self-test at startup 52
user interface 54
Customer Connections
40 pin connector
pinouts 15
eight-pin terminal strip 14
D
DC
input breakers 12
monitoring DC input 31
bulk 31
by shelf 31
dual input 31
DC wiring
DC ground 41
inverter only systems 41
inverter plus rectifier systems 41
DC input breakers 12
DC wire & breaker sizes (recommended) 29
dual A/B feed 40
dual feed with tie bar 39
single feed 38
De-rating 84
F
Fuses
customer use, 2A load 13
CXCU graphic display 13
rectifier fuses
location 13
part number 68
G
Generator
automatic transfer switch requirements 42
walk-in mode 89
I
Inverters
alarm codes 77
assigning inverters to DC Input Groups 31
assigning inverters to phases 30
insertion/ removal 46
locate command 55
monitoring and control
Group Mapping 30, 57
AC secondary source lost (233) 75
View Live Status 55
saving config file 88
seed module 45
settings