Instruction Manual

35
Doc. #: 0260011-J0 Rev B
4.4 Unpacking Instructions
1. Remove 4 front screws.
2. Remove the screws that are holding the
AMPS24 against the inner frame of the
packaging (the # of screws varies depending
on the size of the AMPS24 unit, i.e. 1 shelf vs.
4 shelves).
3. Remove the 6 nails that hold
the entire packaging down
on the skid (3 nails on each
side of the box).
4. Remove entire wooden box up and over the AMPS24.