Instruction Manual

55
Doc. #: 0260011-J0 Rev B
6.1.5 Customizing the User Interface
To customize alarm, signal and relay labels for your specific application, select Logs and Files >
Manage Editable Text Files to change the text strings.
The following example shows how to revise a text string on the Home page; in this example, the
string Load Current is changed to Inverter DC Input Current.
Choose the label
category from the
drop-down menu.
2
3
1
Locate the text string on the left
and edit it in the box on the right.
Figure 36 — Editing the user interface text.