Instruction Manual

Doc. #: 0260011-J0 Rev B

;261; ;DC 1 : Vdc_in Low Transfer; ;42; ;V;

x Low DC Voltage – a lower value transfers the load from DC/AC to AC/AC converter.

x Range: 39 to 61, default: 42 V

;262; ;DC 1 : Vdc_in Low Stop; ;42; ;V;

x Low DC Voltage – a lower value causes the DC/AC converter to stop.

x Range: 39 to 61, default: 42 V

;263; ;DC 1 : Vdc_in High Start; ;58; ;V;

x High DC voltage – a higher value re-starts the DC/AC converter

x Range: 39 to 61, default: 58 V

;264; ;DC 1 : Vdc_in High Transfer; ;61; ;V;

x High DC Voltage – a higher value transfers the load from DC/AC to AC/AC converter

x Range: 39 to 61, default: 61 V

;265; ;DC 1 : Vdc_in High Stop; ;61; ;V;

x High DC voltage – a higher value stops the DC/AC converter.

x Range: 39 to 61, default: 61 V

;270; ;DC 2 : Vdc_in Low Start; ;49; ;V;

;271; ;DC 2 : Vdc_in Low Transfer; ;42; ;V;

;272; ;DC 2 : Vdc_in Low Stop; ;42; ;V;

;273; ;DC 2 : Vdc_in High Start; ;58; ;V;

;274; ;DC 2 : Vdc_in High Transfer; ;61; ;V;

;275; ;DC 2 : Vdc_in High Stop; ;61; ;V;

x The same as Group DC 1

;280; ;DC 3 : Vdc_in Low Start; ;49; ;V;

;281; ;DC 3 : Vdc_in Low Transfer; ;42; ;V;

;282; ;DC 3 : Vdc_in Low Stop; ;42; ;V;

;283; ;DC 3 : Vdc_in High Start; ;58; ;V;

;284; ;DC 3 : Vdc_in High Transfer; ;61; ;V;

;285; ;DC 3 : Vdc_in High Stop; ;61; ;V;

x The same as Group DC 1