VESTAL GB2 MONITOR 2 INTRODUCTION First and foremost we would like to thank you for purchasing this product. Our commitment 0 achieving the satisfaction of customers Hike you is manifested through our 180-8001 certification and the manufacture of products like the one you have just purchased. {is advanced technology and strict quality control will ensure that customers and users enjoy the numerous features hat this device offers.
VESTAL GB2 MONITOR CHARACTERISTICS ~ Hands-free monitor, TFT color serene. ~ Monitor with simple installation {non-polarized wire BUS) The VESTAL GB2/H monitor interacts with hearing aids equipped with T-mode, making conversation beanfeast the door panel and apartment easier Capacities function bunions to access and select menu functions: Usernames Displaying tha door panel image. ~ Displaying the camera image (DO-CAM-GB2Z module required). Activating the outdoor fight. ~ Intercom between apartments.
VESTAL GB2 MONITOR DESCRIPTION OF THE MONITOR color screen. ©. Microphone. ©. Statutory communication button, in standby: Display door panel image. d. Door release bunion 1. In standby: Activate out, light, ©. Door release button 2. In standby: do not shadily’ rods, if the mode is activated, the icon 2 je illuminates. f. End telecommunication bunion tn standby, intercom within apartment function. in auto autopsy switch-on: Select other door panels), cameras) in descending mode and in carousel (f any). ¢.
VESTAL GB2 MONITOR 5 DESCRIPTION OF THE MONITOR Sating the monitor's address codes (addresses Ute 31h DIPS: Sets the end of ne. Set to ON In monitors where the video cable terminates. Set to OFF only in intermediate monitors, Dip to ON Dip to OFF i hi SRE DIP to DIPS: To set the monitor address (addresses 0 lo 31). Code 0732 Code 08 Code 18 Code nie WEE WEAR WHEE signify P23 4H 8 Code 01 Code 08 Code 17 Code DIE Oh Oh De. HEYDAY ARRANGE Bags. Evan.
VESTAL GE2 MONITOR INSTALLING THE MONITOR IN A WALL MOUNTING CONNECTOR Avid dusty or smoky environments or locations near sources of heat. Positioning the wall mounting connection: The {op of the connector must be positioned at a height of 1.60m. The minimum distance between the sides of the connector and the closest object must be Som.
VESTAL GE2 MONITOR INSTALLING THE MONITOR IN AN EMBEDDING BOX Avid dusty or smoky environments or locations near sources of heat. Positioning the embedding box: Make a hole in the wall fo position the top of the universal embedding box at a height of 1.60 m from the ground. The minimum distance between the sides of the embedding box and the closest object must be Som. Partitioning the embedding box and fitting the wall mounting connector: Pass the cable through the hole made in the embedding box.
VESTAL GB2 MONITOR 8 OPERATION Monitor description when receiving 8 call and during communication: # Communication with hearing aid. Note: Set the hearing aid switch to T-mode. Hormel (seat? GBH only). Elapsed call communication time. Ra Door panel that mads the call/ CITY camera selected. Ir call. Ir: communication, [— 1 In telecommunication LED Illuminated, Serener settings: brightness, couch contrast and monitor volume, bmn. S100 COT caters) image. {DO-CAM-FEZ module required), # End telecommunication.
VESTAL GB2 MONITOR OPERATION Continued from previous page. 1.2 Call not answered (missed call): When a call is received, the monitor(s) will play a melody, the LED will illuminate {tha LED of button == will blink rapidly} and the image from the door panel will be displayed on the master monitor without the visitor knowing. If the callus not answered within 40 seconds the monitor cerebellums © standby mode, 1.
VESTAL GB2 MONITOR 10 SCREEN AND VOLUME SETTINGS MENU © To stadium brightness, the monitor must be in communication or auto switch-on mode. Then pres: 10 change the display options . Using menu buttons wand, select the required brightness level. Press butting following option’ a or press @le to exit the settings mend. adjust the color. the monitor must be in communication or auto switch-on mode.
VESTAL GB2 MONITOR 11 USER DIRECT ACCESS FUNCTIONS Description of bunions with user direct access functions: see Display Goon panel image. + Activate intercom function within apartment, Gre Activate outdoor ght. Ge Activate/deactivate Do not disturb’ mode function. 1. Displaying door panel/camera images: 1.1 To display the image from one of the installed door panels/carmearas, press button == while the monitor is in standby.
VESTAL GB2 MONITOR 12 USER DIRECT ACCESS FUNCTIONS Continued from previous page. Then, using menu buttons and +, select the required door bicameralism (DQ-CAM-GER module required} in descending and ascending made respectively (carousel mode). Teri connection will last for 30 seconds or until option is pressed twice fa door panel is selected or ones if a caners is selected.
VESTAL GB2 MONITOR 13 USER DIRECT ACCESS FUNCTIONS Continued from previous page. 3 Activating "Do not disturb’ mode: 3.1 To activate ‘Do not disturb’ mode, press bunion on the master monitor while in standby, The statue LED oof button Ges below of the master and secondary monitors in the apartment will illuminate indicating that the function is activated. The monitors in the apartment will not receive door panel or intercom calls, Monitor in standby arm (Sp 3.
VESTAL GB2 MONITOR 14 TUBER DIRECT ACCESS FUNCTIONS Continued from previous page. Cn the other monitors in the apartment, the status LED of button so will blink rapidly and a melody will indicate that an intercom call is being made, Press button == to accept the call and establish communication, the status LED of buttons will slink slowly, or press Button + 1 cancel i.
VESTA? GB2 MONITOR 15 USER MENU Description of the menu buttons: en Songs ee tight Intercom cL SEED Menu entry and user settings button, sms Display door panel image. Menu screen exit and selection button. {Gee Activate outdoor fight. 4 Menu entry and selection button. oe intercom function between apartments To access the menu, the monitor must ban standby, Then press menu button root display the options screen of he rain men.
VESTAL GB2 MONITOR 18 USER MENU Continued from previous page. door cameraperson images: To display the image from one of the Installed door cameraperson, press button ews, Main menu screen os Dotty The following screen will display the image from the door panel with address 1, indicating the selected door panel 01 and the elapsed connection tre.
VESTAL GB2 MONITOR 17 USER MENU Continued from previous page. 2. Activating the outdoor light: To activate the outdoor Eight, press button Ge The outdoor light (SARAGOSSA module required) will activate for 1 minute. See the "TSARISTS ML” user manual for how to set other light declination times, Main menu screen Hi oi mar . Carl Exit pans Besotting 3. Intercom between apartments: To access the intercom function within an apartment, press button Ses /doddle. The following selection screen will be displayed.
VESTAL GB2 MONITOR 18 USER MENU Continued from previous page. On the monitor{s) of the apartment called, the status LED of bunion sw will blink rapidly, a melody will indicate that an intercom call is being made and the address of tha apartment making the call will be shown. Press button fo accept the call and establish communication, the status LED of distributions will blink slowly, or press button {to cane it.
VESTAL GB2 MONITOR 19 USER MENU Continued from previous page JH Eras button The following selection and information screen will be displayed. Main menu screen Selection and information screen Aver v ire installer setup screen 0001 00 na le Grn ® Eh Lie buttons and to enter the first function code number and then press buttonhole to enter the next function code number; repeat the previous steps until the complete function code number is entered.
VESTAL GB2 MONITOR 20 USER MENU Continued from previous page. Press button o go to the main menu screen. i nr and information scr Main menu screen . Serrano To access the monitor seeings, press ton The settings screen will be splayed Main menu screen Settings screen Lat eee Then press option ta change tha intercom ringtone.
VESTAL GB2 MONITOR 21 USER MENU Continua from previous page. 6,2 To change the intercom ringtone, use buttons J and 4. Then press option E55 to change the apartment door ringtone. ® BEER wm (Gene change the apartment door ringtone, use buttons and # Then press optics 0 change the ringtone embolism. Apartment door ringtone settings Ringtone volume settings oom n wh {Gee sre {Ge 84 To change the ringtone volume. use cottonseed 4.
VESTAL GB2 MONITOR 22 TUBER MENU Continued from previous page. 8.5 Default settings. To reset the default settings (ringtone, ringtone volume, brightness, color, contrast and fornication volume), press mutton Along lore will confirm that the function has been set. Then press EE to select the language.