Instructions / Assembly

SQUARE RECYCLING BIN

29 GALLON

ALP4450-01-SERIES

Applying Your Stickers

Step 1:

A. Take your sticker and line it up

directly under the lid of your trash

can.

B. Peel off a corner of the backing so

that the transfer sticker begins to

stick to your can.

C. Slowly peel the backing off.

Slowly

Step 2:

A. Once it is fully peeled off, take a

credit card or any straight edge

piece of plastic and gently scrap

it across the sticker.

a. This will ensure that it is

adhering to the trash can.

Step 3:

A. Starting from the right-hand side,

slowly peel the top layer of plastic

off the transfer sticker.

a. Please note that you must do

this step very slowly or risk

ripping the sticker

B. Should the sticker start to lift, simply

back up, take your credit card,

lightly scrap it to help it stick,

and try to remove the top layer of

plastic again.

Step 4:

A. Once the top plastic layer is fully

removed, should you have any

residual adhesive on your can,

you can use a little bit of rubbing

alcohol gently to remove it.

Rubbing

Alcohol

PAGE 1
ALP4450-01-SERIES 29 GALLON SQUARE RECYCLING BIN Applying Your Stickers Step 1: Step 2: A. Take your sticker and line it up directly under the lid of your trash can. A. Once it is fully peeled off, take a credit card or any straight edge piece of plastic and gently scrap it across the sticker. B. Peel off a corner of the backing so that the transfer sticker begins to stick to your can. a. This will ensure that it is adhering to the trash can. C. Slowly peel the backing off. Slowly Step 3: A.