Owner's Manual

26-EN
Displaying Notification List
(Ready on future update)
You can view the received Notification from Facebook in the connected
Smartphone via this unit.
1 Press and hold VSOURCE for at least 2 seconds.
The received Notification will be displayed according to when it
was posted.
2 Turn the Rotary encoder to select the desired Notification,
and then press ENTER.
3 Then go to step 2 of “Receiving Notification”.
Notes
• When there is no Notification, “NO NOTIF” will be displayed.
• The displayable amount of the Notification list depends on the
connected Smartphone.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
AUDIO
*1
 GENERAL  DISPLAY  TUNER  SIRIUSXM
*2

IPOD&USB  APP  BLUETOOTH
*3
 AUDIO
(e.g. Select GENERAL)
GENERAL:
CLOCK MODE  CLOCK ADJ
*4
 AUX SETUP  AUX NAME
*5
 PLAY MODE  BEEP  DEMO  CLOCK MODE
DISPLAY:
ILLUMINATI  DIMMER  TEXTSCROLL  SCROLLTYPE 
ILLUMINATI
TUNER:
MC SEEK  SEEK TYPE  LISTENMODE  LIVE MODE  FM
SET  MC SEEK
IPOD & USB:
USB SKIP  IPOD LIST  USB SKIP
APP:
ALPINE APP  TTS VOLUME  ALPINE APP
*1 Refer to “Sound Setting” on page 17.
*2 Only for CDE-HD148BT. Refer to “SiriusXM Setting” on
page 43.
*3 Refer to “BLUETOOTH SETUP” on page 30.
*4 Refer to “Setting Time” on page 10.
*5 Displayed only when AUX SETUP is set to ON.
3 Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
VIEW


/ENTER

SOURCE
Rotary encoder