Owner's Manual

28-EN
MANUAL:
The display is scrolled when a disc is loaded or when a track is
changed, etc.
Note
• The unit scrolls CD text names, folder names, file names or tag display.
Scroll Type Setting
Choose from two scrolling methods. Select the type you prefer.
 Setting item: SCROLLTYPE
Setting contents:
TYPE1 (Initial setting) / TYPE2
TYPE1:
The characters scroll from right to left, a single character at a time.
TYPE2:
Words are built up from left to right, a single character at a time.
When the display is filled, it is cleared and the remaining words are
displayed the same way until all words of the title have been
shown.
TUNER is selected on the setup main menu in step 2.
Setting the Multicast Seek
Multicast Seek can be set to ON/OFF.
 Setting item: MC SEEK
Setting contents:
OFF / ON (Initial setting)
OFF:
SEEK is available only for the Main Program Service. Multicast
stations are ignored.
ON:
SEEK finds both the Main Program Service and Sub-program
Service of Multicast stations.
Setting the Digital Seek
Digital Seek can be set to ON/OFF.
 Setting item: SEEK TYPE
Setting contents:
HYBRID (Initial setting) / DIGITAL
HYBRID:
SEEK UP/DOWN is available for digital and analog radio stations.
However, the strong signals have priority during SEEK.
DIGITAL:
SEEK UP/DOWN is available only for the digital radio station. Any
analog only stations (or very weak digital) are skipped.
Switching the listening mode
The unit provides you 4 reception methods, among which you can select
an optimized method to receive the Digital signal or Analog signal
according to your own preference and the signal strength.
 Setting item: LISTENMODE
Setting contents:
HYBRID / DIGITAL / DIGITAL MC (Initial setting) / ANALOG
HYBRID:
Receive both digital and analog radio stations. If the digital signal
is weak, this unit will switch to receive the analog radio signal
automatically.
DIGITAL:
Keep receiving the digital radio signal, even when the digital
signal is weak.
DIGITAL MC:
Keep receiving the digital radio signal while listen to a
Sub-program Service of a Multicast station.
ANALOG:
Only receive the analog radio signal, even when the digital signal
is strong.
Setting the Live mode (LIVE MODE)
While receiving a live broadcast, you can select an optimized receiving
method according to your own preference and the signal strength.
 Setting item: LIVE MODE
Setting contents:
ANALOG (Initial setting) / DIGITAL / LISTENMODE
ANALOG:
While receiving a live broadcast, this unit will only receive the
analog radio signal even when the digital signal can be received.
DIGITAL:
While receiving a live broadcast, this unit will keep receiving the
digital radio signal even when the digital signal is weak.
LISTENMODE:
While receiving a live broadcast, the setting value is the same as
that in LISTENMODE, refer to “Switching the listening mode” on
page 28.
Setting the TUNER (FM) tone quality (FM SET)
This unit can set your preferred tonal quality for the FM analog radio
stations.
 Setting item: FM SET
Setting contents:
HI-FI / NORMAL (Initial setting) / STABLE
HI-FI:
High-quality setting
NORMAL:
Standard setting
STABLE:
Control noise
Note
• Noise may be more noticeable when HI-FI is set, depending on the
reception status. In this case, the Normal setting is recommended.
“IPOD & USB” is selected on the setup main menu in step 2.
Setting the USB Skip function
During searching, you can skip over designated folders/files by pressing
and holding . For example, if you select 10 FILE in the searching
mode, by pressing and holding  you can skip backward 10 folders/files
from the current folder/file; by pressing and holding  you can skip
forward 10 folders/files from the current folder/file. If the folders/files
searched are less than the assigned skipped-over ones, pressing and
holding  will skip to the first or last folder/file.
 Setting item: USB SKIP
Setting contents:
10 FILE (Initial setting) / 20 FILE / 50 FILE / 100 FILE
Tuner Setting
USB and iPod Setting