Owner's Manual

35-EN
While calling, you can adjust the volume.
Turn the Rotary encoder to adjust the volume.
Note
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result in
feedback. Feedback is directly related to the volume. Turning down the
volume as low as acceptable, will reduce it. Positioning the microphone
in a direction away from the main car speakers (e.g. clipped on sun
visor) may also reduce feedback at high volume.
While calling, activating the Voice Mute function will instantly mute the
microphone input. Your voice will not be heard by the caller.
While calling, press  to mute the microphone input.
Press  again will bring the microphone input back to its
previous volume level.
While making a call, this function allows you to initiate the transfer of
the audio between the Smartphone and the speakers in the car.
While calling, press BAND or press and hold  for at
least 2 seconds to switch the call sound between the unit
and Smartphone.
Note
• Depending on the Smartphone, this operation may not be performed.
BLUETOOTH Audio Operation
Audio information of a BLUETOOTH compatible Smartphone, a
portable player, etc., is controllable/playable wirelessly
*
from this unit.
* To play back audio, a Smartphone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
Notes
• Set BT IN to ON when you want to use BLUETOOTH Audio function.
Refer to “Setting the BLUETOOTH Connection (BT IN)” on page 30.
• During a call, sound on the BLUETOOTH audio source is muted.
• If you operate the Hands-free phone (e.g. searching in the phonebook)
while using the BLUETOOTH Audio function, BLUETOOTH Audio
playback may be affected.
Press V/SOURCE to select the BT AUDIO mode.
Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
Note
• The action depends on the paired device.
Press .
A playback stops. Pressing again will resume a playback.
Press  or  to select the desired Group (Folder).
Note
• This function may not be available depending on the paired device.
Artist name, album name, etc., may be searched and displayed during
playback or pause.
1 Press ENTER to activate the search mode.
2 Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3 Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4 Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the paired device.
• The pause mode may be canceled after the search.
• This function may not be available depending on the paired device.
Adjusting the volume when receiving a
Call
Muting the microphone input quickly
(Voice Mute)
Call Switching Operation
Recalling the BLUETOOTH Audio Mode
Selecting the desired Song
Pausing
Selecting the desired Group (Folder)
Searching for a desired song