Owner's Manual
36-EN
Playback
If you connect a Flash Memory containing MP3/WMA/AAC, the
following table shows which type of files can be played on which models.
1
Press VSOURCE to select the USB AUDIO mode.
2
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
3
To pause playback, press .
Pressing again will resume playback.
Notes
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/song name is
displayed.
• If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name, artist
name, and album name). All other tag data is ignored.
• “NO SUPPORT” is displayed when text information is not compatible
with this unit.
• Before disconnecting Flash Memory, be sure to change to another
source or set to pause.
•Press k VIEW to switch the display. For details, refer to “Displaying
the Text” on page 23.
Searching for a Desired Song
Flash Memory can contain hundreds of songs. By organizing songs by
folder, you can quickly find a desired folder/file. This operation is
similar to search a folder/file from PC.
1
Press ENTER to activate the search mode.
2
Turn the Rotary encoder to select a desired folder/file.
3
Press ENTER to play the selected file or enter the
selected folder.
Press and hold ENTER for at least 2 seconds to play back all
songs in the selected folder.
4
If a folder is opened in Step 3, Repeat Steps 2 to 3 until the
desired folder/file is found.
Notes
• If no operation is performed for 60 seconds, the search mode is
canceled.
• In the search mode, pressing t will return to the previous mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
canceled.
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 39.
• In the search mode, a search can be made quickly by USB Skip function
to find the desired folder/file. For details, refer to “Setting the USB Skip
function” on page 28.
• The total folders/files should be less than 1,000 (512 files for root
folder) in each search hierarchy.
Repeat Play
1
Press z 4.
The song is played back repeatedly.
REPEAT ONE
*1
REPEAT FOLDER
*2
REPEAT OFF REPEAT ONE
*1 Only a file is repeatedly played back.
*2 Only files in a folder are repeatedly played back.
2
To cancel repeat play, select (REPEAT OFF) with the above
procedure.
Notes
• During repeat play, setting M.I.X. to ON will cancel the repeat play.
• a indicator lights up during repeat play mode.
Flash Memory (optional)
MP3 WMA AAC
CDE-HD148BT
CDE-147BT
4
5
/ENTER
SOURCE
VIEW
Rotary encoder
Preset buttons
(1 through 6)