Operation Manual

11
EN
1. Slide the back cover from the wireless controller and fit the supplied
batteries with the correct polarity.
2. Choose an area on your dashboard (A) where you want to install the
wireless controller and wipe down with the supplied cleaning wipe.
Ensure the surface is completely clean and dry before adhesion.
Installing the wireless controller
WARNING: See the ‘Safety instructions’ on page 2 for more
information on fitting and using the batteries.
WARNING: See page 6 for positioning guidance.
4. Slide the wireless controller (C) on to the bracket until you hear it click
into position.
3. Attach the bracket (B) to your dashboard.
A
B
C