Operation Manual

14
1. Turn on your vehicle’s ignition to ensure that the receiver is switched on.
Note: The receiver LED will remain illuminated for a short period of time to indicate
that it is powered on.
After a few seconds, your controller will automatically connect to the receiver. If your
controller doesn’t connect to the receiver, see ‘Troubleshooting’ on page 25.
Switching on EZi-DAB-BT for the first time
ANTENNA
CONNECTING
2. Choose your display language by turning the Select dial to highlight the language
you want. Push the Select dial in to confirm your choice.
LANGUAGE
ENGLIsh
3. Turn and press the Select dial to choose the way that you have connected
EZi-DAB-BT to your audio system. If you are connecting via an available FM
frequency, select ‘FM TRANSMIT’ and move to the next step. If you are connecting
using an auxiliary cable, select ‘LINE OUT’ and skip to step 5,
FM TRANSMIT
AUDIO OUT
4. Turn and press the Select dial to choose an unused FM frequency that you want
EZi-DAB-BT to use for transmitting to your audio system. The recommended
frequency for transmitting to your audio system in the UK is 87.6 MHz.
Note: You’ll need to tune your audio system to this FM frequency when ever you want
to listen to EZi-DAB-BT. For easy access, you can store this FM frequency as a preset
on your audio system (see your vehicle’s owner’s manual for more information).
87\60MHZ
FM FREQ
DIG\ RADIO
SCANNING
5. Wait for EZi-DAB-BT to complete an autotune and find all available digital stations.
When the autotune is complete, a station will start playing.