Owner's Manual
Table Of Contents
- Owner's Manual
- Resetting the System
- Contents
- Operating Instructions
- Precautions
- Copyrights and Trademarks
- Key Features
- Getting Started
- Components and Features
- Turning Power On/Off
- Turning the System On
- Resetting the System
- Adjusting the Volume
- Muting the Volume
- Touch Screen Operation
- Sound Settings
- Voice Recognition
- Switching Sources
- Inputting Text (Keypad)
- Information Display on the Status Bar
- Home Screen
- Adding Your Favorite Menu Items to My Menu
- All Menus Screen
- Radio/HD Radio
- SiriusXM
- Disc
- Disc Video
- Disc Music
- Data CD – Image Disc
- Disc DVD
- Audio CD
- USB Music
- USB Video
- USB Image
- iPod Music
- Android Auto
- Apple CarPlay
- HDMI
- AUX (Auxiliary Device)
- Bluetooth Audio
- Bluetooth Operation
- Phone
- Setup
- Camera Operation
- Information
- Warranty
- User Manual: Navigation software for Alpine Navigation System
- Quick Reference Guide
- Installation Manual
- Product Registration
G) SiriusXM Tuner Input Connector
To
SiriusXM
Tuner.
® Radio Antenna Receptacle
® Speed Sensor Lead (Green/White)
Improper
connection
of
the
speed
pulse
line
may
cause
important
safety
features
of
the
vehicle
to
fail
(such
as
the
brakes
or
air
bags)
.
Such
failures
may
result
in
an
accident
and
loss
of
life.
We
strongly
recommend
that
the
installation
be
performed
by
a
trained,
authorized
Alpine
dealer.
© Rear Camera Input Connector (RCA)
@ Front
or
Side Camera Input Connector (RCA)
®
AUX
Input Connector
Input
lead
for
AUX
video/audio
signal
.
(J)
Remote Turn-On Lead (Blue/White)
Connect
this
lead
to
the
remote
tum-on
lead
of
your
amplifier
or
signal
processor.
@ Reverse Lead (Orange/White)
Connect
to
the
plus
side
of
the
car's
reverse
lights
.
These
lights
illuminate
when
the
transmission
is
shifted
into
reverse
(R)
.
With
this
lead
properly
wired,
the
video
picture
automatically
switches
to
the
rear
camera
whenever
the
car
is
put
into
reverse
(R).
® Power Antenna Lead (Blue)
Connect
this
lead
to
the
+B
terminal
of
your
power
antenna
,
if
applicable.
•
This
lead
should
be
used
only
for
controlling
the
vehicle's
power
antenna.
Do
not
use
this
lead
to
tum
on
an
amplifier
or
a
signal
processor,
etc
.
@)
Parking Brake Lead (Yellow/Blue)
Connect
this
lead
to
the
power
supply
side
of
parking
brake
switch
to
transmit
the
parking
brake
status
signals
to
the
unit.
6-EN
® Switched Power Lead (Ignition) (Red)
Connect
this
lead
to
an
open
terminal
on
the
vehicle
's
fuse
box or another unused power source that provides
(+)
12V
only
when
the
ignition
is
turned
on
or
in
the
accessory
position.
@
Fuse
Holder (15A)
(@
Battery Lead (Yellow)
Connect
this
lead
to
the
positive
(+)
post of
the
vehicle's
battery
.
® Ground Lead (Black)
Connect
this
lead
to
a
good
chass
is
ground
on
the
vehicle.
Make
sure
the
connection
is
made
to
bare metal
and
is
securely
fastened
using
the
sheet
metal
screw
provided
.
@)
Left
Rear(+)
Speaker Output Lead (Green)
(@
Left Rear
(-)
Speaker Output Lead (Green/
Black)
@ Left
Front(+)
Speaker Output Lead (White)
@)
Left Front
(-)
Speaker Output Lead (White/
Black)
@)
Right Front
(-)
Speaker Output Lead (Gray/
Black)
® Right
Front(+)
Speaker Output Lead (Gray)
® Right Rear
(-)
Speaker Output Lead (Violet/
Black)
@ Right Rear (+) Speaker Output Lead (Violet)
@ Remote Control Output Lead (Gray) (For Rear
Monitor)
Connect
this
lead
to
the
remote
control
input
lead
.
This
lead
outputs
the
controlling
signals
from
the
remote
control
.
@ Remote Control Input Lead (Gray)
Connect
the
external
Alpine
product
to
the
remote
control
output
lead.