Specifications

FF- 6000 Specifications
Frequency response
E.Q. set flat 20Hz - 20kHz +/-0.5dB
Maximum output level
Main output Zone output and Booth monitors output
active balanced. +22dBu
Distortion
any input < 0.01% typically <0.005%
Noise measured 20Hz-20kHz
Stereo inputs e.q. flat gain set to max EIN < -98dB
RIAA stage ref. 5mV 1kHz Input shorted -80dBV “A” weighted
Microphone input (ref 150R) EIN < -124dBU
Gain
Stereo inputs rear trim @ max +/- 15dB
Stereo inputs rear trim @ min + 0dB -20dB
Microphone input max + 75db
Microphone input min + 0dB
Maximum input level
Stereo input A (line) +20dBV
Stereo input A (RIAA) -8dBV 400mV
Stereo input B +20dBV
Microphone +4 dBV
Input Impedances
Stereo input A > 47k ohms
Stereo input B > 10k ohms
Microphone input > 2k ohms active balanced
Equalisation
3 band e.q. per channel +5dB -23 dB @ Treble 10kHz
Mid 1kHz,
Bass 100Hz
Dimensions
(Exc. Knobs & connectors):
Width 483mm (19”)
Height 312mm (12.25"-7RU)
Depth 110mm (4.33")
Balanced outputs For unbalanced operation strap pins 1&3 to ground and use pin 2 hot. This will result in no
loss of output level or performance.