Quick Setup Guide

Quick Setup Guide

Power Options and Cable Connection Instructions

Follow one of the options below to power upVX200 for configuration.

-DC input:12~48VDC 1.25A

- PoE input:54VDC, 0.6A

Option 1: 12-48 VDC Power

1. Insert Ground/DC positive/DC negative wires (recommended AWG range: 12 -

24) into the terminal block. Use a small flat-blade screwdriver to tighten the wire-

clamp screws so as to prevent the wires from loosening.

VX200

Ethernet Cable

Two-Hole Installation

Wall