Quick Setup Guide

Quick Setup Guide

2. Insert the terminal block into the receptor. Use the flat-blade screwdriver to

lock the terminal block to the VX200 main unit in place.

3. Connect the ground wireto a reliable earth ground point at site, and the

other two wires: DC positive/DC negative to a power source.

4. Connect a computer to theVX200 Eth (PoE) port with an Ethernet cable.

5. Turn on the power source. When the Power LED light is up and becomes

steady, the unit should be ready for configuration.

Option 2: 802.3af/at-Compliant PoE Switch

1. Connect VX200 Eth(PoE) port to an 802.3af/at PoE Switch with an Ethernet

cable.

2. Connect a computer to theswitch with another Ethernet cable.

3. When the Power LED light is up and becomes steady, the unit should be

ready for configuration.

VX200

Ethernet

(Data + Power)

802.3af/at – Compliant

PoE Switch

Ethernet (Data)