Quick Setup Guide

Quick Setup Guide

1. Change TCP/IP Setting on Your Computer

For Windows 7/Windows 10 users,

1. Go toControl Panel, click Network and Sharing Center and then choose

the Ethernet adapter that is in connection with the VX200 unit. Click it and

then click Properties.

2. Under the Networking tab, selectInternet Protocol Version 4 (TCP/IPv4) in

the list box “This connection uses the following items”, and then click

Properties.

3. Type in the following IP address and Subnet mask:

 IP address: 192.168.1.2

 Subnet mask: 255.255.255.0

4. Click OK to close the Internet Protocol Version 4 (TCP/IP)Propertiesdialog

box and click OK again to close the adapterProperties dialog box.