Quick Setup Guide

17
Altai Technologies Ltd. All rights reserved
Quick Setup Guide
Warning
VX200may require professional installation depending on the deployment scenario.
Only use the optional power adaptor available for VX200. Using a different power adaptor might damage
the device.
The metal chassis of the equipment may be hot. Pay special attention or use special protection before
handling this equipment.
Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.
Disclaimer
Hereby, Altai Technologies Limited declares that the radio equipment type VX200 is in compliance
withDirective 2014/53/EU. The full test of the EU declaration of conformity is available at the following
internet address: www.altaitechnologies.com
.
All specifications are subject to change without prior notice. Altai Technologies assumes no responsibilities
for any inaccuracies in this document or for any obligation to update information in this document. This
document is provided for information purposes only. Altai Technologies reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
Copyright © 2019 Altai Technologies Limited
ALL RIGHTS RESERVED.
Original designer and manufacturer:
Altai Technologies Limited
Unit 209, 2/F, Lakeside 2,
10 Science Park West Avenue,
Hong Kong Science Park,
Shatin, New Territories,
Hong Kong
Telephone: [phone]
Fax: [phone]
Web: www.altaitechnologies.com
Customer Support Centre:
Email: [e-mail]
US distributor:
Krysp Wireless, Inc.
Address: 8028 Manor Road, Leawood, Kansas,
USA 66202.
Telephone: [phone]