Quick Setup Guide

Quick Setup Guide

Installation Option 1: DIN-Rail Mount (For 35mm Rail)

To mount the VX200 unit on the rail, follow the steps below.

1. Drive the short screws to attach the DIN-rail mounting bracket to the back

of the unit.

2. Insert the upper bracket lip into the DIN rail. Make sure the rail lies

between the bracket body and the spring.

3. Press the unit towards the rail until it snaps into place.

To remove the VX200 unit from the rail, follow the steps below.

1. Press the unit down so that the lower bracket

lip slightly detaches from the rail.

2. Pull the unit out to remove it from the rail.

Bracket

Spring

Rail