User`s guide

MULTI-TASKER
10
The16x16 configuration will switch each
individual input to each individual output, e.g.m
[I2O1C5] will connect input 2 with output 1.
The 8x8 configuration will switch 2 inputs to 2
outputs at the same time, e.g., [I2O1C5] will
connect input 2a with output 1a and input 2b with
output 1b.
The 5x5 configuration will switch 3 inputs to 3
outputs at the same time, e.g., [I3O2C5] will
connect input 3a to output 2a, 3b to 2b, 3c to 2c.
The 4x4 configuration will switch 4 inputs to 4
outputs at the same time, e.g., [I3O2C5] will
connect input 3a to output 2a, 3b to 2b, 3c to 2c,
and 3d to 2d.
The 2x2 configuration will switch 8 inputs to 8
outputs at the same time, e.g., [I1O2C5] will
connect input 1a to output 2a, 1b to 2b, 1c to 2c,
and 1d to 2d, 1e to 2e, 1f to 2f, 1g to 2g, and 1h
to 2h.
13. [ImMx…] [OnMx..] [CiMx..]
Im: m is from 1 to 16 for 16 inputs (maximum 3
characters: I16)
On: n is from 1 to 16 for 16 outputs (maximum 3
characters: O16)
Ci: i is from 1 to 18 for 18 cards (maximum 3
characters: C19)
Mx: x is from 1 to 8 for 8 different links
(maximum 2 characters: M8)
This command is very useful for using in MT
system with front panel. User can use 3 different
keys to send 3 different strings of commands.
KEY 1: to select inputs (use a single key to
select different inputs)
KEY 2: to select outputs (use a single key to
select different outputs).
KEY 3: to select card for link factor (use a single
key to select different cards).
When the MT105-112/119 receives this kind of
command, it will wait until third command string
received (CiMx..]) and then, will link the
commands together by looking at CiMx
group.Each command can be as long as 42
characters.
14. [VIS=nCi]
This command enables/disables VIS feature:
If n=1 VIS will be enabled
If n=0 VIS will be disabled
Example:
Command [VIS=1C5] will enable VIS feature for
switcher card in slot 5.
15. [TVCi]
This command tests VIS circuit (with signal ON
on input 1).
16. [HELPCi]
This command displays all available for user
Multi-Tasker interface commands.
2x2
Input Output
O2a O1a O1a O2a
O2b O1b O1b O2b
O2c O1c O1c O2c
O2d O1d O1d O2d
O2e O1e O1e O2e
O2f O1f O1f O2f
O2g O1g O1g O2g
O2h O1h O1h O2h