Instructions / Assembly

ALTITUDEFANS.COM
Please call or text 1-833-888-FANS (3267) or email [e-mail] for further assistance.
☐
Use bandage to extend into the wave filter mounting hole and
the screw hole of the hanger bracket, and tighten bandage (for
subsequent installation of the ceiling Canopy) . (Figure 5)
Wave filter
Bandage (Tighten)
Hanger Bracket
13

WARNING:
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors except for the
ground wire. Do not operate fan until the
blades are in place. Noise and motor
damage could result.
☐
After connections have been made, turn leads upward and carefully
push leads into the outlet box, with the white and green leads to one
side of the box and the black leads to the other side. (Figure 4)