Instructions / Assembly

Visit www.altitudefans.com/install for installation video tutorials and product support
14
HOW TO INSTALL YOUR CANOPY HOUSING
NOTE:
This step is applicable after the neccessary
wiring is completed.
WARNING:
To avoid possible fire or shock, make sure
that the electrical wires are completely
inside the canopy housing and not pinched
between the housing and the ceiling.
☐
Assemble canopy by rotating key slot in canopy over shoulder
screw in hanger bracket, taking care not to pinch the wires.
Tighten shoulder screw. Fully assemble and tighten second
shoulder screw that was previously removed. (Figure 1)
☐
Securely attach and tighten the three “L” tabs of
canopy screw cover over the three slots of canopy
utilizing the key slot twist-lock feature. (Figure 2)