Instructions / Assembly
Visit www.altitudefans.com/install for installation video tutorials and product support
6
PRSTALLATION
This manual is designed to make it as easy as possible for you to assemble, install, operate and
maintain your ceiling fan
Tools Needed for Assembly (Not Included)
Wiring outlet and connectors of type required by the local code. The minium wire would be a 3-conductor
(2-wire with ground) of the following size:
Up to 50 ft.
50-100 ft.
12
12
Phillips
One 1/4” blade
screwdriver
screwdriver
Wire strippers/
cutters
One stepladder
NOTE:
Place the parts from the loose parts
bags in a small container to keep
them from being lost. If any parts are
missing contact your local retailer.
WARNING:
Before assembling your ceiling
fan, refer to section on proper
method of wiring your fan (page
10). If you feel you do not have
enough wiring knowledge or
experience, have your fan
installed by a licensed electrician.