Owner's manual

Altman Lighting, Inc. 57 Alexander Street., Yonkers, NY 10701 1-800-4-ALTMAN

1/24/14 rev:C

General Maintenance

In order to insure longevity of your fixture, regular cleaning is necessary. The lens and fan

must be cleaned periodically to allow proper function of the fixture. Do not use alcohol or any

other solvent with chemicals to clean the lens. When cleaning your lens, use a clean soft lint

free cloth with damp with water. Do not use any hard materials to wipe the lens. Maintenance

and cleaning of your fixture depends on the frequency of use and the environmental conditions

your fixture is kept in. Make sure the fan is kept free of lint and dust to allow proper air flow.

To avoid damage to the shell of your fixture do not use alcohol or other organic solvents.

Troubleshooting

Problem Action

Unable to start / Power Check the power line connection between the fixture and electric source.

Check DMX Address.

Check the fan and make sure there is no dust or debris is blocking the

Check the Lifetime of the LEDs, make sure the lenses are clean.

Data Signal Problems

Check Data lines and make sure all cables are in good condition.

Check the termination points.

Intensity of the beam is dim

Fixture Power Intermittence

Imperfections in the beam Make sure the lens is clean and free of cracks

Beam distortion Make sure the lens is clean and free of cracks