Owner's manual

Altman Lighting, Inc. 57 Alexander Street., Yonkers, NY 10701 1-800-4-ALTMAN

1/24/14 rev:C

ACCESSORY INSTRUCTIONS

ACCESSORY RETAINING LATCH

This unique retaining hatch is designed for

positive locking and manual return.

1. Slide cover to right side.

2. Swing cover back.

3. Insert accessory.

4. Close cover. Make sure latch locks in

place.

DROP IN IRIS SLOT

This larger slot can accept either a drop-in iris

or a motorized pattern device (gobo rotator,

yo-yo etc). The slot has a retractable cover to

prevent light leak when not in use. When a

device is used, the cover should be closed to

the edge of the device placed in the slot.

When a drop-in iris is used, always place it so

the flat side is facing the shutters.

PATTERN PROJECTION

The pattern holder accepts standard ETC

Source 4 size pattern holders. The image of

the pattern can be rotated 360° in either

direction. The use of the donut will sharpen the

image.

INSTALLING SHUTTER PLATES

1. Pressure Plate (completely flat): Install

such that the tabs are on the top and

bottom and sides.

2. Iris and spring plate. Install so that the (4)

studs face the back of the unit.

SHUTTERS

1. The shutters are not removable without

dissembling the unit.

2. Care must be given to make sure each of

the four shutters stay in their proper

positions in between the shutter plates.

Plate Stud

Springs

SOFT FOCUS LENS ADAPTER Part #: PHX-SFLA (sold separately)

The soft focus lens adapter is a 5° luminate holographic lensing option to help diffuse the LED

array for a softer focus. The matte side of the diffusion should face the light source as the shiny

side should face the lens barrel. NOTE: Do not add metal gobos in the same pattern holder. The

heat build up will melt the diffusion material.