Owner's manual

Altman Lighting, Inc. 57 Alexander Street., Yonkers, NY 10701 1-800-4-ALTMAN

1/24/14 rev:C

Operation Menu and Options

There is a player option in the menu where you can pre-program your fixture to play back up to 5

cues. The cues can run as short as 1 second or as long as 99 minutes. You can choose any of

the colors you desire within your cues to create any look you want. You also have the option of

putting a delay in between your cues. To program your cues follow the steps below.

Press ENTER to turn the screen on.

PressDOWNtogettothe“player”option.

PressENTERtocapturethe“playersetting”.

Press DOWN to turn the player one or off. In this case we will be turning the player on.

PressMENUoncetobackoutof“on/off”selection.

PressDOWNtogoto“EditPresets”.

PressENTERtogoto“EditCue1”.

Press UP or DOWN to select cue # you would like to edit. In this case we will start with

cue 1.

PressENTERtoselect“Cue1”.

PressEntertoselectifyouwanttoenabletheCueonoroff.Select“enable”.

Press MENU to back up one step.

Select the channel/color you desire for your first cue. For example select red press

ENTER.

PressUPandscrollto“255”forfullintensity.

Press ENTER to confirm.

Press MENU to back out of red selection.

(Repeat these same steps to edit the rest of your cues.)

Menu Category Control Type Option 1 Option 2 Option 3 Factory Default

Player On

PLAYER

Off

Cue # 1

Cue #2

Cue #3

Cue#4

Cue # 5

Enable/Disable

Delay

Red

Green

Blue

White

Off / On

1 sec to 99 min

0 to 255

2.0 seconds

255

Spreadsheet for Menu categories for the player