Datasheet

AL400UL3X Multi-Output Power Supply/Charger
Rev. DSAL400UL3X - A26F
Overview
Specifications
• This Altronix power supply converts a 115VAC 60Hz input into three (3)
individually regulated power limited outputs.
• 5VDC, 12VDC or 24VDC simultaneous output.
• 1.75 amp @ 5VDC and 12VDC, and
1.5 amp @ 24VDC supply current.
• Class 2 Rated power limited output.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:
- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH batteries.
Agency Approvals
UL 294 UL Listed for Access Control
System Units.
UL 1481 UL Listed Standard for Safety for
Fire Protective Signaling Systems.
MEA - NYC Department of
Buildings Approved.
CSFM - California State Fire
Marshal Approved.