ALTV244 Series CCTV Power Supplies Installation Guide Models Include: ALTV244 ALTV244CB ALTV244175 ALTV244175CB ALTV244300 ALTV244300CB - 24VAC @ 4 amp (100VA) - 24VAC @ 4 amp (100VA) or 28VAC @ 3.5 amp. or 28VAC @ 3.5 amp. - Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs. - 24VAC @ 7.25 amp (175VA) - 24VAC @ 7.25 amp (175VA) or 28VAC @ 6.25 amp. or 28VAC @ 6.25 amp. - Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs. - 24VAC @ 12.5 amp (300VA).
Overview: These Altronix CCTV Power Supplies provide 24VAC or 28VAC distributed via four (4) fuse or PTC protected outputs for powering CCTV cameras, heaters and other video accessories. Altronix Model Number Total Output Current Output Voltage 4 amp 3.5 amp 4 amp 24VAC 28VAC 24VAC 3.5 amp 7.25 amp 6.25 amp 7.25 amp 28VAC 24VAC 28VAC 24VAC 6.25 amp 28VAC 12.5 amp 24VAC 10 amp 28VAC 12.
4. Connect AC power to the black and white flying lead of the transformer (Fig. 1, pg. 4). Units with line cord installed skip Instruction #4. Use 18 AWG or larger for all power connections (Battery, AC output). 5. Measure output voltage before connecting devices. This helps avoiding potential damage. CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the output voltage. 6.
F2 F3 F4 JMP1 F1 MAIN FUSE ALTV244 OFF SW1 ON 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS LED N 1P 1N 2P 2N 3P 3N 4P P S 4N INPUT 24VAC or 28VAC fused output 1 (Follow same procedure using terminals 2P & N through 4P & N fused outputs 2 through 4) Voltage Selection Configuration White Lead 115 VAC input 50/60 Hz, 0.
F1 F2 F3 MAIN FUSE ALTV244175 F4 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS LED N 1P 1N 2P 2N 3P 3N 4P P S 4N INPUT 24VAC or 28VAC fused output 1 (Follow same procedure using terminals 2P & N through 4P & N fused outputs 2 through 4) Power Switch Voltage Selection Configuration Black Lead 115VAC input 50/60 Hz, 1.
ALTV244300 Power Switch 3N 2N 3P 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS 2P Voltage Selection Configuration 1N Black Lead White Lead 1P F1 F2 F3 4P 4N N F4 P LED S INPUT MAIN FUSE Transformer underneath power supply board 24VAC Output ALTV244300CB Power Switch 28VAC Output N P S (Yellow) (Black) N S P (Yellow) INPUT (Black) - 6 - 3N 3P 2N 2P 1N Black Lead White Lead 1P 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS F1 F2 F3
Enclosure Dimensions (H x W x D) for: • ALTV244 • ALTV244CB 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm) 7.25” (184.15mm) 3.625” (184.15mm) 1.25” (31.75mm) 3.5” (88.9mm) 1.25” (31.75mm) 2” (50.8mm) 0.6” (15.24mm) 0.6” (15.24mm) 6.05” (153.67mm) 1.125” (28.575mm) 1.125” (28.575mm) 2” (50.8mm) 8.125” (206.375mm) 1” (25.4mm) 1” (25.4mm) 6.05” (153.67mm) 0.6” (15.24mm) 0.6” (15.24mm) 1.25” (31.75mm) 3.5” (88.9mm) 1” (25.4mm) 1” (25.4mm) ALTV244series 5.25” (133.35mm) 1” (25.
Enclosure Dimensions (H x W x D) for: • ALTV244175 • ALTV244175B • ALTV244300 • ALTV244300CB 8.5” x 7.5” x 3.85” (215.9mm x 190.5mm x 97.9mm) 3.63” (92.2mm) 1.25” (31.75mm) 3.85” (97.79mm) 7.25” (184.15mm) 0.6” (15.24mm) 1.25” (31.75mm) 1.25” (31.75mm) 0.6” (15.24mm) 1” (25.4mm) 1” (25.4mm) 0.9” (22.86mm) 0.9” (22.86mm) 8.13” (206.5mm) 8.13” (206.5mm) 1.75” (44.45mm) 1” (25.4mm) 1” (25.4mm) 0.6” (15.24mm) 1.25” (31.75mm) 0.6” (15.24mm) 3.85” (97.79mm) 3.85” (97.79mm) 1” (25.4mm) 1” (25.
