Datasheet

The eBridge1CRT - IP over Coax transceiver and receiver kit is designed to enable fast
10/100Base-T Ethernet digital communication over coax cable. These plug and play
units facilitate system upgrades from analog to IP cameras/devices utilizing existing
legacy Coax and eliminating the costs and labor associated with installing new network
cabling. In addition data transmission is extended to 2,000’ (over five times the 100m/328’
Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit
Composite Video Signal with Ethernet data simultaneously.
Input:
• 12VDCto24VDCClass2powersupply(polaritynot
 observed)or16VACto24VACClass2plug-in
transformer.
Power Consumption:
• 12VDC/275mA,24VDC/110mA,
 16VAC/375mA,24VAC/200mA.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax)
technology.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCat-5orhigherstructuredcable.
• Distance:upto328ft.(100m).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
• Throughputisratedtopass25mbpsofdataat
 distancesupto1500ft.Withproperheadend
equipment, multiple Megapixel cameras can be used.
Coax:
• Distance:upto1,500ft.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
• BlueLED-Coaxlinkconnection.
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• GreenLED-Power.
Environmental:
• OperatingTemperature:
 14ºFto122ºF(---10ºCto+50ºC).
• StorageTemperature:
--22ºto158ºF(---30ºto+70ºC)Storage.
• Humidity:20to85%,non-condensing.
Electrical:
• BTU/Hr.:
 - VDC:1.69-4.46BTU/Hr.
Electrical (cont’d):
• BTU/Hr.:
 - VAC:2.46-3.07BTU/Hr.
Accessories:
• Compositevideocables(included)-enables
simultaneous composite video signal over the
same Coax.
• Two(2)powerconnectors.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
 (SD)cameras.
• ExtendNetworklinkdistanceinanindustrial
environment.
• UpgradedeployedCCTVCoaxtoadigitalnetwork
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enablessimultaneoustransmissionofcompositeand
digital IP video.
Mechanical:
• Lightweightmoldedfiberglassreinforcedpolyester
enclosure is corrosion resistant and does not contain
halogens.
• Dimensions(WxLxHapprox.):
 2.5”(63.5mm)x3.8”(96.52mm)x1”(25.4mm)
• Productweight(approx.):4oz.(0.11 kg).
• Shippingweight(approx.):7oz.(0.17kg).
Additional eBridge models:
• eBridge1CR: Single port ethernet receiver
(use with eBridge transceiver).
• eBridge1CT: Single port ethernet transceiver
(use with eBridge receivers).
• eBridge1CRT: Single port ethernet receiver and
transceiver kit.
• eBridge4CR:Four(4)portethernetreceiver.
• eBridge16CR: Sixteen (16) port ethernet receiver.
eBridge1CRT - IP over Coax Kit
Rev.DSeBridge1CRT_04042013
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Overview
Agency Approvals
European Conformity
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
C-TickApproved-Z1409
eBridge1CR
and eBridge1CT
*slocisaregisteredtrademarkofIntersilCorporation.