Installation Guide
- 2 - eFlow104N Series
Overview:
The eFlow104N power supply/chargers convert a 120VAC / 60Hz input to a 24VDC nominal output
(see Power Supply Configuration Reference Chart and Specifications).
eFlow104N Series Power Supply Configuration Reference Chart:
Altronix
Model Number
Nominal DC Outputs
Maximum Supply
Current for Main and
Aux. Outputs (amp)
Input Rating:
120VAC, 60Hz
Input Fuse Rating
Battery Fuse Rating
Ripple Voltage (mV)
Under low battery
condition
Power Distribution
Modiule
Number of Outputs
Fused Output Ratings
PTC Output Ratings
Accommodates up
to 7AH Batteries
Accommodates up
to 12AH Batteries
[DC] [AUX]
24VDC Output
Range (volts)
24VDC Output
Range (volts)
eFlow104N
20.17-26.4 20.28-26.4 10A 4.5A 6.3A/250V 15A/32V 700 N/A 1
– –
3
–
eFlow104NX – – –
3
eFlow104N8
20.17-26.4 20.28-26.4 10A 4.5A 6.3A/250V 15A/32V 700 PD8UL 8
2.5A –
3
–
eFlow104NX8 2.5A – –
3
eFlow104N8D
20.0-26.4 20.28-26.4 10A 4.5A 6.3A/250V 15A/32V 700 PD8ULCB 8
– 2A
3
–
eFlow104NX8D – 2A –
3
eFlow104N16
20.17-26.4 20.28-26.4 10A 4.5A 6.3A/250V 15A/32V 700
PD16W
16
2.5A –
3
–
eFlow104NX16 2 - PD8UL 2.5A – –
3
eFlow104N16D
20.0-26.4 20.28-26.4 10A 4.5A 6.3A/250V 15A/32V 700
PD16WCB
16
– 2A
3
–
eFlow104NX16D 2 - PD8ULCB – 2A –
3
These units provide non power-limited outputs: eFlow104N, eFlow104NX, eFlow104N8, eFlow104NX8, eFlow104N16 and
eFlow104NX16. These units provide power-limited outputs: eFlow104N8D, eFlow104NX8D, eFlow104N16D and eFlow104NX16D.
If a power-limited output is required in the end-product application, the DC output from the power supply must be connected to a
separately Listed control unit or accessory board that provides power-limited outputs. The product(s) providing the power-limited
output(s) must be listed as appropriate for the particular end-product application (fire alarm, burglar alarm, access control), and wired
in accordance with the products installation instructions. Class 1 wiring methods, separation of circuits, and proper fire-rated enclo-
sures all must be considered when connecting the DC output of the power supply to the end-product devices. The auxiliary output of
these units are power-limited.
UL Listings for US Installations:
UL 294 - UL Listed for Access Control System Units.
UL 603 - UL Listed for Power Supplies for Use with Burglar-Alarms Systems.
UL 1481 - UL Listed for Power Supplies for Fire Protective Signaling Systems.
UL Listings for Canadian Installations:
ULC-S318-96 - Power Supplies for Burglar Alarm Systems. Also suitable for Access Control.
California State Fire Marshal
European Conformity
Stand-by Specifications:
Battery
Burg. Applications
4 hr. Stand-by/
15 min. Alarm
Fire Applications
24 hr. Stand-by/
5 min. Alarm
Access Control
Applications
Stand-by
7AH 0.4 amp/10 amp N/A 5 Mins./10 amp
12AH 1 amp/10 amp 0.3 amp/10 amp 15 Mins./10 amp
40AH (for eFlow104NX refer to Fig. 8, pg. 10) 6 amp/10 amp 1.2 amp/10 amp Over 2 Hours/10 amp
65AH (for eFlow104NX refer to Fig. 8, pg. 10) 6 amp/10 amp 1.5 amp/10 amp Over 4 Hours/10 amp
Altronix Corp.
140 58th St. Brooklyn, NY