User Manual

Altronix HubSat4WP Outdoor Passive UTP Transceiver Hub w/Integral Camera
Power transmits UTP video, RS422/RS485 data and power over a single CAT-5
or higher structured cable. Unit provides 4 camera channels in a wall mount
enclosure. Video transmission range is up to 750 ft. max. per channel. Units are
compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features
24VAC or 28VAC PTC protected outputs and surge suppression. Optionally, the
HubSat4WP can be used as an accessory module to transmit video from up to
4 cameras over a single CAT-5 or higher structured cable back to the HubWay,
HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addi-
tion, the HubSat4WP powers these cameras locally to eliminate the possibility of
voltage drop associated with long cable runs.
HubSat4WP - Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubSat4WP - 11142012
Overview
Specifications
Agency Approvals
CE Approved.
Input:
• 115VAC50/60Hz,1.5amp.
•Primaryfuse(internal)isratedat3.5amp/250V.
Output:
• Individuallyselectable24VACor28VACpower
outputs with OFF position.
• Unitprovidesupto1ampmax.perchannelnotto
exceedatotalof8amp(100VA)maximumcurrent.
• Class2Ratedpowerlimitedoutputs.
• PTCprotectedoutputsarerated@1amp
per channel.
• Surgesuppression.
Video:
• Four(4)channelsofvideoovertwistedpair
uptoadistanceof750ft.(228.6m)perchannel.
• Four(4)75ohmvideooutputs.
Data:
• RS422/RS485 data inputs.
Visual Indicators:
•Four(4) individual power LED indicators.
Accessories:
• VideoBalun/Combiners:
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Mechanical:
• EnclosureDimensions(HxWxDapprox.):
812”(304.8mm)x8”(203.2mm)x6”(152.4mm)
• Productweight:13.75lbs.(6.24kg).
• Shippingweight:14.1lbs.(6.4kg).
Video Balun/Combiners
Video from Camera
Data to Camera
Power to Camera
Cat5
back to
HubW
ay
or
HubSat
HubWayAv2 - Slim-line Video Balun/Combiner
compatible with all HubWay UTP Hubs
for AC or DC fixed cameras or PTZs.
Refer to the HubWay Video Balun/Combiner
Installation Guide Rev. 123008
12VDC
-- +RJ45
DATA
+ --
VIDEO
Commercial
CCTV Accessory
3C03
HubWayDv VIDEO BALUN/COMBINER
Wire
Connectors
Red
Power LED
+ 12VDC Power
--- to Camera
--- Data
+ to Camera
To BNC
Connector
of Camera
Structured
Cable from
HubWayH16
RJ45 Jack
HubWayDv - Video Balun/Combiner
compatible with all HubWay UTP Hubs for DC
fixed cameras or PTZs.
HubWayDvi - Video Balun/Combiner
built-in isolation. Compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs. With
or without internal isolation.

Summary of content (2 pages)