Video • Data • Power Passive UTP Transceiver Hub with Integral Camera Power Installation Guide Models Include: HubSat4D - Four (4) Camera Channels HubSat42D - HubSat4D w/four (4) HubWayAv Video Balun/Combiners for 24VAC Cameras HubSat43D - HubSat4D w/four (4) HubWayDv Video Balun/Combiners for 12VDC Cameras Rev. 052708 More than just power.
Overview: Altronix HubSat4D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners.
7. Connect Video Balun/Combiner at camera 1 to the HubSat4D unit utilizing CAT-5 or higher structured cable. Plug the RJ45 connector at one end of a structured cable into the RJ45 jack marked [PVD1] of the HubSat4D (Fig. 1i, pg. 4). Plug the RJ45 connector at the opposite end of the structured cable into the RJ45 jack of the Video Balun/Combiner located at camera 1. • For 24VAC cameras use Altronix model HubWayAv Video Balun/Combiner (Figs. 2a, 2b, pg. 6).
6. Data connection between HubSat4D and HubWay/HubWayLD/HubWayLDH UTP Transceiver Hubs: Plug the RJ45 connector at one end of a structured cable into the RJ45 jack marked [Data 1-4] of the HubSat4D (Fig. 1h, pg. 4). Plug the RJ45 connector at the opposite end of the structured cable into the corresponding RJ45 channel jack of the HubWay/HubWayLD/HubWayLDH UTP Transceiver Hubs (Fig. 6, pg. 7). When using fixed cameras disregard this step.
9. 10. 11. 12. 13. 14. • HubWayAv - Terminals marked [AC POWER] (Figs. 2a, 2b, pg. 6). • HubWayDv - Terminals marked [– 12VDC +] (Figs. 2c, 2d, pg. 6). Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 4a, pg. 6). Connect the power outputs of the HubWayAv or HubWayDv Video Balun/Combiners to the power inputs of the cameras (Figs. 2a-2d, pg. 5). Polarity must be observed.
Fig. 2 - HubWayAv and HubWayDv Video Balun/Combiners Fig. 2c Fig. 2a VIDEO VIDEO HubWayAv HubWayDv VIDEO BALUN/COMBINER CAT5 VIDEO BALUN/COMBINER AC + DATA -- POWER RJ45 Jack + DATA -- Removable Terminal Block Fig. 2b To BNC Connector of Camera Removable Terminal Block RJ45 Jack Fig. 2d Structured Cable from HubSat4D Green Power LED AC Power to Camera To BNC Connector of Camera -- Data to + Camera HubWayAv passes AC voltage through pins 4, 5, 7, 8 and [AC Power] terminals.
Typical Application Drawing for HubSat4D as a Passive UTP Transceiver Hub with Integral Camera Power: Fig.
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated “DANGEROUS VOLTAGE” within the products enclosure that may be of sufficient magnitude to constitute an electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
