User Manual

HubWay8D Passive UTP Transceiver Hub w/Integral Camera Power transmits
UTP video, RS422/RS485 data and power over a single CAT-5 or higher struc-
tured cable. Unit provides 8 camera channels in a space saving 1U EIA 19” rack
mount chassis which may be rack, wall or shelf mounted. Video transmission
range is up to 750 ft. max. per channel. Units are compatible with AC and/or
DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or
HubWayDvi Video Balun/Combiners. In addition, the unit features individually
selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An
optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power
can be used as an accessory module to transmit video from up to 4 cameras over a
single CAT-5 or higher structured cable back to the HubWay8D. In addition, the
HubSat4D provides power to these cameras locally to eliminate the possibility of
voltage drop associated with long cable runs.
HubWay8D - Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay8D - 10262012
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
Input:
• 115VAC60Hz,1.5ampor230VAC50Hz,1amp.
Video:
• Eight(8)channelsofvideoovertwistedpair
up to a distance of 750 ft. (228.6m) per channel.
• Eight(8)75ohmvideooutputs.
Data:
• RS422/RS485 data inputs.
Power:
• Unitprovidesupto1ampmax.perchannelnotto
exceed a total of 5 amp (150VA) maximum current.
• Individuallyselectable24VACor28VACisolated
power outputs with OFF position.
• Class2Ratedpowerlimitedoutputs.
• PTCsarerated@1ampperchannel.
• Surgesuppression.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• Totalsystempowerconsumption:150W.
• 57BTU/Hr.
• SystemACinputVArequirement:150VA.
Features:
• Eight (8) power LEDs.
• Illuminatedmasterpowerdisconnectcircuitbreaker
with manual reset.
• IEC320-3-wiregroundedlinecord(detachable).
Accessories:
• OptionalHubSat4Dallowstransmissionofupto
four (4) video signals over a single CAT-5 or higher
structured cable.
• VideoBalun/Combiners:
- HubWayAv2 Slim-line - compatible with all
HubWay UTP Hubs for AC or DC fixed cameras
or PTZs.
- HubWayDv - compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs.
- HubWayDvi - built-in isolation. Compatible with
all HubWay UTP Hubs for DC fixed cameras
or PTZs.
Mechanical:
• Unitscanberack,wallorshelfmounted.
• Modular1UstandardEIA19”rackmountchassis.
• EnclosureDimensions(HxWxDapprox.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Productweight(approx.):11.0lbs.(4.99kg).
• Shippingweight(approx.):12.3lbs.(5.58kg).
HubWay8D