Owner's manual

HubWayEX32 Active UTP Transceiver Hub employs automatic gain control
(AGC) to transmit UTP video, RS422/RS485 data over a single CAT-5 or
higher structured cable. Unit provides 32 camera channels in a space saving
1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted.
Video transmission range is up to one mile max. per channel. Units are com-
patible with fixed or PTZ cameras. Each grouped camera channel provides
video transmission for up to four (4) cameras over a single CAT-5 or higher
structured cable. This permits the installation of up to thirty-two (32) cameras
at remote locations over four (4) CAT-5 or higher structured cables.
HubWayEX32 - Active UTP Transceiver Hub
Rev. DSHubWayEX32_10262012
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
Input:
• 115VAC60Hz,0.4ampor230VAC50Hz,0.2amp.
Video:
• Thirty-two(32)channelsofvideoovertwistedpair
up to a distance of 5000 ft. (1524m) per channel.
• Thirty-two(32)75ohmvideooutputs.
Data:
• RS422/RS485 data inputs.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• Totalsystempowerconsumption:40W.
• 15BTU/Hr.
• SystemACinputVArequirement:40VA.
Features:
• Picture and Gain control.
• Automaticcorrectionforreversevideopolarity.
• Thirty-two (32) video signal LEDs.
Features (cont’d):
• Illuminatedmasterpowerdisconnectcircuitbreaker
with manual reset.
• IEC320-3-wiregroundedlinecord(detachable).
Accessories:
• OptionalHubSat4D/DiorHubWayEXPallows
transmission of up to four (4) video signals over
a single CAT-5 or higher structured cable.
Mechanical:
• Unitscanberack,wallorshelfmounted.
• Modular1UstandardEIA19”rackmountchassis.
• EnclosureDimensions(HxWxDapprox.):
 1.625”(41.275mm)x19.125”(486mm)
x 8.5” (216mm)
• Productweight(approx.):8.7lbs.(3.95kg).
• Shippingweight(approx.):10.0lbs.(4.54kg).
HubWayEX32