User guide

HubWayLD16D Active UTP Transceiver Hub w/Integral Camera Power trans-
mits UTP video, RS422/RS485 data and power over a single CAT-5 or higher
structured cable. Unit provides 16 camera channels in a space saving 1U EIA 19”
rack mount chassis which may be rack, wall or shelf mounted. Video transmis-
sion range is up to 3000 ft. max. per channel. Units are compatible with AC and/
or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or
HubWayDvi Video Balun/Combiners. In addition, the unit features individually
selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An
optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power
can be used as an accessory module to transmit video from up to 4 cameras over a
single CAT-5 or higher structured cable back to the HubWayLD16D. In addition,
the HubSat4D provides power to these cameras locally to eliminate the possibil-
ity of voltage drop associated with long cable runs.
HubWay
®
LD16D Active UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWayLD16D_10312012
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
HubWayLD16D
Input:
• 115VAC50/60Hz,1.5amp
or 230VAC 50/60Hz, 1 amp.
•Primaryfuse(internal)isratedat5amp/250V.
Video:
• Sixteen(16)channelsofvideoovertwistedpair
up to a distance of 3000 ft. (914.4m) per channel.
• Eight(8)75ohmvideooutputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individuallyselectable24VACor28VACpower
outputs with OFF position.
• Unitprovidesupto1ampmax.perchannelnotto
exceed a total of 10 amp (300VA) maximum current.
• Class2Ratedpowerlimitedoutputs.
• PTCprotectedoutputsarerated@1amp
per channel.
• Surgesuppression.
Visual Indicators:
•ACinputpowerindicator.
•VideosignalandpowerLEDindicators.
Features:
• Picture and Gain control.
• Illuminatedmasterpowerdisconnectcircuitbreaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unitcanberack,wallorshelfmounted.
• 1UEIA19”rackmountchassis.
Accessories:
• OptionalHubSat4Dallowstransmissionofupto
four (4) video signals over a single CAT-5 or higher
structured cable.
• VideoBalun/Combiners:
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Mechanical:
• Modular1UstandardEIA19”rackmountchassis
• EnclosureDimensions(HxWxDapprox.):
 1.625”(41.275mm)x19.125”(486mm)
x 2.498” (63.45mm)
Productweight:20.85lbs.(9.46kg)
Shippingweight:22.15lbs.(10.05kg)