User guide

ManualsBrandsAltronix ManualsAccessories for electricalMaximal11E Data Sheet

Maximal11E provides system designers and installers with “maximum” power choices

and the highest levels of versatility. It provides 12VDC, 24VDC, or 12VDC and 24VDC

simultaneously via two (2) single output power supply/chargers. It includes AC fail, low

battery and battery presence monitoring. Optional Altronix

field installable UL Listed

sub-assemblies provide multiple outputs and a wide range of features for specific Access

Control and Fire Alarm applications.

Maximal11E

Expandable Power System

Rev. DSMaximal11E - 06172013

Overview

Specifications

Optional Field Installable UL Listed Sub Assembly Modules

Maximal11E

Location A - ACM4, ACM4CB, MOM5, PD4UL, PD4ULCB,

PD8UL, PD8ULCB, PD16W & PD16WCB.

Power Supply

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Location B - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,

PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.

Input:

• 115VAC 60Hz, 4.5 amp input.

Output:

• 12VDC and/or 24VDC outputs.

• Maximum output current:

Options P/S 1 P/S 2

A 12VDC @ 3.5 amp 12VDC @ 3.5 amp

B 24VDC @ 2.7 amp 24VDC @ 2.7 amp

C 12VDC @ 3.5 amp 24VDC @ 2.7 amp

• Class 2 Rated power limited outputs.

• Filtered and electronically regulated outputs (built-in

power supply).

• Thermal and short circuit protection with auto reset.

Fuse Ratings:

• Power Supply input fuse rated @ 3.5 amp/250V.

Features:

• AC fail supervision (form “C” contact).

• Low battery and battery presence supervision

(form “C” contact).

Battery Backup:

• Built-in charger for sealed lead acid or gel type

batteries.

Battery Backup (cont’d):

• Maximum charge current 0.7 amp per p/s board.

• Automatic switch over to stand-by battery when

AC fails.

• Zero voltage drop when unit switches over to battery

backup (AC failure condition).

Visual Indicators:

• AC input and DC output LED indicators.

Electrical:

• Operating temperature: 0º C to 49º C ambient.

• BTU/Hr.:

- 12VDC: 43.00 BTU/Hr.

- 24VDC: 66.33 BTU/Hr.

- 12VDC & 24VDC: 54.66 BTU/Hr.

• System AC input VA requirement: 517.5VA.

Mechanical:

• Enclosure Dimensions (H x W x D approx.):

26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)

• Enclosure accommodates up to four (4)

12AH batteries.

• Product weight (approx.): 42.3 lbs. (19.17 kg).

• Shipping weight (approx.): 46.3 lbs. (21.00 kg).

Location C - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,

PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.

Summary of content (2 pages)

PAGE 1
Maximal11E Expandable Power System Rev. DSMaximal11E - 06172013 Overview Maximal11E provides system designers and installers with “maximum” power choices and the highest levels of versatility. It provides 12VDC, 24VDC, or 12VDC and 24VDC simultaneously via two (2) single output power supply/chargers. It includes AC fail, low battery and battery presence monitoring.
PAGE 2
Agency Approvals UL Listed for Access Control System Units (UL 294). CSFM California State Fire Marshal Approved. Altronix Corp. 140 58th St. Brooklyn, NY Enclosure Dimensions (H x W x D approximate): 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm) 19” (482.6mm) 2” (50.8mm) 4” (101.6mm) 4” (101.6mm) 7” (177.8mm) 2” (50.8mm) 6.25” (158.75mm) TOP 1.25” (31.75mm) 0.85” (21.59mm) 19” (482.6mm) 8.9” (226.06mm) 1.25” (31.75mm) 0.85” (21.59mm) 8.4” (213.36mm) 1.5” (38.1mm) 1.5” (38.1mm) 1.